Bg main 12

View Photo

Elastoflex 89

Elastoflex 89 is a hot applied, polymer modified asphalt crack sealant. This product applies and sets up best in up to moderate temperatures, and is highly durable in cold to hot climates. Elastoflex 89 is quick melting and extremely flexible. Formulated with a high recycled rubber content with a high viscosity to resist excess flow during application, it is ideal for highways and county roads. Elastoflex 89 delivers high performance at a moderate cost.

Very Cold
Cold
Moderate
Hot
Very Hot

How do I read this chart?

Cone Penetration : 77°F (25°C), 150g, 5s : ASTM D5329 90 dmm max
Bond : 1 in (25mm), 5 cycles, 50% ext, 0°F (-18°C) : ASTM D5329 Pass
Flow : 140°F (60°C) : ASTM D5329 5 mm max
Density : 77°F (25°C) : ASTM D70 9.96 lb/gal (1.193 g/mL) max

ASTM D6690 Type 1 (supersedes ASTM D1190) AASHTO M324 Type 1 (supersedes AASHTO M173)

Read and follow application instructions before use. This product must be heated using indirect heating methods, either a double boiler or hot oil circulating kettle. Equipment must have means of maintaining constant agitation to the material.
Maximum safe heating temperature: 400°F (204°C).
Recommended application temperature: 380°F (193°C).

Maxwell Products, Inc. warrants that our products meet the applicable specifications at the time of shipment. Due to the many differing procedures used in preparing and installing materials, Maxwell Products assumes no liability for material failure due to improper installation, equipment failure or operator errors. Any remedies are limited, at Maxwell Products' option, to replacement of materials or refund (full or partial) of the purchase price from Maxwell Products. Claims must be made within three (3) months of the date of purchase. There is no other warranty either expressed or implied.